影响因子：1.5

DOI码：10.15376/biores.19.2.3793-3807

所属单位：东北林业大学

教研室：机电工程学院

发表刊物：BioResources

刊物所在地：The United States of America

关键字：Rotary fiiction welding of wood; Heat-treated Scotch pine; Process parameters; Welding effect; Welding Mechanism

摘要：Rotary friction welding of wood to heat-treated lumber from Scotch pine is feasible and the strength of the joint exceeds that of glued and hammered joints. This study investigated the rotary friction welding process parameters and its welding mechanism applicable to heat-treated Scotch pine. Untreated Scotch pine served as the control. The one-way test revealed the tenon/bore ratio of 1.5, rotational speed of 2000 to 3500 r/min, and feed rate of 15 to 20 mm/s as the ideal process parameters for heat-treated Scotch pine. Under the same conditions, heat-treated material had weld strength up to 63.2% higher than untreated material. The portion of the weld zone with better weld strength was larger in size, had a full surface, and was darker in color, according to ultra-depth-of-field microscopic examinations. The internal wood components melted and cooled after the welding was finished and re-polymerized to form a tightly wrapped structure, linking the dowel rods to the substrate, according to the results of scanning electron microscopy.

第一作者：张剑

论文类型：期刊论文

学科门类：工学

文献类型：J

ISSN号：1930-2126

是否译文：否

发表时间：2024-01-01

收录刊物：SCI

发布期刊链接：https://bioresources.cnr.ncsu.edu/resources/characterisation-of-rotary-friction-welding-process-and-mechanism-of-heat-treated-scotch-pine/